Washroom Cubicles

Guide · Businesses · 3 min read · Updated 17 November 2026

How Much Do Toilet Cubicles Cost in the UK?

Short answer

Supplied and installed toilet cubicles in the UK typically cost £350–£550 per cubicle in MFC, £550–£900 in compact laminate and from £1,200 per cubicle for full-height premium systems. IPS duct panelling costs £180–£350 per linear metre, urinal screens £90–£180 each and a cubicle repair visit from £150. Material, height, hardware and site conditions decide where a project falls.

How Much Do Toilet Cubicles Cost in the UK?

Typical washroom cubicle prices in 2026

Cubicles are priced per cubicle, with IPS panelling priced per linear metre and screens per item. A run of cubicles costs less per unit than a single one, because one end panel and one set of rails serve several cubicles, and installation time is shared. The figures below are for supply and installation of standard sizes in a typical commercial, education or leisure washroom, with clear access and a finished, level floor.

ItemTypical priceBest suited to
MFC cubicle£350–£550 per cubicleOffices and low-moisture washrooms
Compact laminate cubicle£550–£900 per cubicleSchools, leisure, wet and heavy-use areas
Full-height premium cubiclefrom £1,200 per cubicleOffices, hotels, restaurants, privacy-focused
IPS duct panelling£180–£350 per linear metreConcealing cisterns and pipework
Urinal screen£90–£180 per screenPrivacy between urinals
Cubicle repair visitfrom £150Doors, locks, hinges, feet and panels

What affects the price

Material is the biggest factor. MFC, melamine faced chipboard, is the economical choice for dry, light-use washrooms. Compact laminate, a solid, dense board made from layers of resin-impregnated paper pressed under high pressure, is water-resistant and very hard wearing, so it suits schools, swimming pools, gyms and public toilets but costs more. Full-height cubicles with floor-to-ceiling doors and panels give the highest privacy and a premium finish, and are priced accordingly.

Hardware matters too. Standard nylon or aluminium headrail systems with indicator bolts are economical. Stainless steel hinges, locks and fittings cost more but last longer in heavy use and vandal-prone locations.

  • Panel material: MFC, compact laminate or premium full-height
  • Cubicle height: standard, high privacy or full height
  • Hardware: nylon, aluminium or stainless steel
  • Number of cubicles in a run
  • Accessible or ambulant cubicles with outward opening doors and grab rails
  • Site conditions: uneven floors, tiled walls, out of hours working
  • Strip out and disposal of old cubicles

IPS panelling and urinal screens

IPS, short for integrated plumbing system, duct panels hide cisterns, pipework and valves behind a neat panel line, with access panels for maintenance. At £180–£350 per linear metre, the price depends on the panel material, the number of fittings mounted on the panels and whether a vanity unit with worktop is included. IPS gives a cleaner look than exposed cisterns and makes cleaning easier.

Urinal screens at £90–£180 each give privacy between urinals. They are usually made from the same material as the cubicles so the washroom looks consistent, with compact laminate the common choice because it resists moisture.

Refurbishment vs replacement

If cubicles are structurally sound but doors are damaged or locks are broken, a repair visit from £150 can replace hinges, locks, feet and individual doors or panels. That is often the best value for washrooms with a few years of life left. Where MFC panels have swollen from water, edges have delaminated, or several cubicles are damaged, replacement is usually more cost-effective than repeated repairs.

A full washroom refit, combining new cubicles, IPS panelling and vanity units, is quoted as a project. Combining work saves time on site and gives a consistent finish.

Lead times and installation

Cubicles are generally made to order to suit your room dimensions and layout, so allow a few weeks from order to installation. The installer will survey and measure the washroom first, checking wall and floor conditions and ceiling height. Installation of a typical run of cubicles takes a day or two. Old cubicles must be removed first, which can mean the washroom is out of use for a short period. For buildings that must stay open, phased installation keeps some toilets available. The survey is also the moment to confirm fixing points, because tiled walls, plasterboard partitions and hollow blockwork each need different fixings to hold brackets securely over years of daily use. Mention any planned tiling or flooring work, so cubicles are installed after it is finished rather than worked around.

Getting an accurate quote

Send a plan or sketch of the washroom with dimensions, the number of cubicles and urinals, photos of existing cubicles and walls, and the ceiling height. Say how the washroom is used, for example office, school, gym or public toilet, because this guides the choice of material and hardware. Mention any accessible or ambulant requirements and whether you want IPS panelling. A specialist can then give a fixed price and confirm lead times.

How many toilets do you need?

Before pricing cubicles, check how many you need. The Workplace (Health, Safety and Welfare) Regulations 1992 require employers to provide suitable and sufficient toilets and washing facilities for staff. The Health and Safety Executive's Approved Code of Practice gives minimum numbers based on how many people use the facilities: one toilet for up to five people, two for six to 25, three for 26 to 50, four for 51 to 75 and five for 76 to 100, with one more for every additional 25 people.

Where facilities are used only by men, urinals can replace some toilets under the Code of Practice. Customer-facing premises, schools and public buildings have different guidance, so check what applies to your building type with your designer or building control.

Questions people also ask

How much does a toilet cubicle cost?

A supplied and installed toilet cubicle typically costs £350–£550 in MFC, £550–£900 in compact laminate, and from £1,200 for a full-height premium cubicle. The cost per cubicle falls slightly for longer runs. Hardware type, accessible or ambulant requirements and site conditions also affect the price.

What is the cheapest type of toilet cubicle?

MFC, melamine faced chipboard, is the most economical cubicle material at £350–£550 per cubicle. It is suitable for dry, light-use washrooms such as many offices. In wet areas or heavy-use washrooms, compact laminate usually offers better value over time because it resists water and impact.

How long does it take to install toilet cubicles?

Installation of a typical run of cubicles takes one to two days once they are delivered. Cubicles are usually made to order, so allow a few weeks from survey and order to installation. Removing old cubicles and any phased working add time.

Written and checked by the Washroom Cubicles team. Read our editorial policy.

Get a free washroom cubicles quote

Tell us what you need and we'll come back with a clear price.

Request a quote