Washroom Cubicles

Washroom Cubicles

MFC Cubicles

Moisture-resistant melamine faced chipboard cubicles in a wide colour range, suited to offices, restaurants and lower-traffic washrooms.

Free Washroom Cubicles quote

No obligation. We only use your details to reply about this job.

MFC Cubicles — Washroom Cubicles

What's involved

MFC cubicles use 18 to 25 mm moisture-resistant chipboard with a melamine face and sealed ABS edges. They are lighter and cheaper than compact laminate and come in a wide range of colours and woodgrains, making them popular in offices, restaurants, retail staff areas and hotels. Because the core is chipboard, MFC is not suitable for wet areas such as showers or for washrooms that are hosed down, and damaged edges let moisture swell the board. Good cleaning practice and raised legs extend its life. Systems use the same range of headrails, hinges and locks as compact laminate. A row of four to six cubicles is usually installed in a day. You need to choose colours and confirm cleaning regimes so the right board is specified.

How we handle it

  1. Tell us about your washroom

    Use the quote form to share the building type, number of cubicles, urinals and basins, and preferred materials. Plans or photos help us match you with the right installer.

  2. Survey and design

    A specialist surveys the room, plans cubicle widths, door swings and IPS runs, and confirms access requirements. You receive a fixed price and drawing.

  3. Manufacture

    Panels, doors and IPS components are cut to size by the manufacturer. Typical lead times are two to four weeks depending on material and colour.

  4. Install and coordinate

    IPS frames go in for the plumber, then cubicles, urinal screens and vanity units are installed, levelled and fixed with all hardware adjusted.

  5. Snag and hand over

    Doors, locks and hinges are tested, panels cleaned and protective film removed. Any snags are fixed before the washroom is handed back.

Price guide

Washroom cubicle prices depend mainly on the material, the number of cubicles, the height of the system and the hardware specification. Compact laminate costs more than MFC but lasts far longer in busy or wet areas. IPS panels and vanity units are priced by run length. Every quote is fixed after survey and includes delivery and installation.

  • Compact laminate cubicle: £550–£900 per cubicle. 12 to 13 mm solid grade laminate with stainless or aluminium fittings, fitted.
  • Full-height premium cubicle: from £1,200 per cubicle. Floor-to-ceiling cubicles with flush doors and concealed hardware for premium washrooms.
  • IPS duct panelling: £180–£350 per linear metre. Frame and panels concealing cisterns and pipework behind WCs or urinals.

Questions about mfc cubicles

What are washroom cubicles made from?

Washroom cubicles are usually made from compact laminate, a solid waterproof board around 12 to 13 mm thick, or moisture-resistant MFC, a melamine-faced chipboard around 18 to 25 mm thick. Premium systems may use glass, timber veneer or steel. Compact laminate suits wet and busy areas; MFC suits offices and lower-traffic washrooms.

How much do toilet cubicles cost?

MFC toilet cubicles typically cost £350 to £550 per cubicle supplied and fitted. Compact laminate cubicles are usually £550 to £900 each. Full-height premium systems start from around £1,200 per cubicle. IPS duct panelling, vanity units and urinal screens are priced separately.

How long does it take to install washroom cubicles?

Manufacturing typically takes two to four weeks after the order is confirmed. On site, a row of four to six cubicles is usually installed in one day, and a full washroom with IPS, vanity units and urinal screens takes one to three days. Installation happens once tiling and flooring are complete.

Get a free washroom cubicles quote

Tell us what you need and we'll come back with a clear price.

Request a quote