Washroom Cubicles

Washroom Cubicles

Urinal Screens and Privacy Panels

Wall-hung screens between urinals and privacy panels at entrances and changing areas, in matching materials to the cubicles.

Free Washroom Cubicles quote

No obligation. We only use your details to reply about this job.

Urinal Screens and Privacy Panels — Washroom Cubicles

What's involved

Urinal screens give privacy between urinals and are usually around 400 mm wide and 900 to 1000 mm high, fixed to the wall at a height that suits the users, often lower in primary schools. They are made from compact laminate or MFC to match the cubicles and fixed with concealed or stainless brackets. Privacy screens at washroom entrances stop direct sightlines from corridors when the door opens, which is important where doors are propped or removed. In changing rooms, panels and benches can be combined for a consistent look. Fitting screens takes a few hours per room. You need to confirm the number and spacing of urinals and decide whether screens should be wall-mounted or include a supporting leg.

How we handle it

  1. Tell us about your washroom

    Use the quote form to share the building type, number of cubicles, urinals and basins, and preferred materials. Plans or photos help us match you with the right installer.

  2. Survey and design

    A specialist surveys the room, plans cubicle widths, door swings and IPS runs, and confirms access requirements. You receive a fixed price and drawing.

  3. Manufacture

    Panels, doors and IPS components are cut to size by the manufacturer. Typical lead times are two to four weeks depending on material and colour.

  4. Install and coordinate

    IPS frames go in for the plumber, then cubicles, urinal screens and vanity units are installed, levelled and fixed with all hardware adjusted.

  5. Snag and hand over

    Doors, locks and hinges are tested, panels cleaned and protective film removed. Any snags are fixed before the washroom is handed back.

Price guide

Washroom cubicle prices depend mainly on the material, the number of cubicles, the height of the system and the hardware specification. Compact laminate costs more than MFC but lasts far longer in busy or wet areas. IPS panels and vanity units are priced by run length. Every quote is fixed after survey and includes delivery and installation.

  • Full-height premium cubicle: from £1,200 per cubicle. Floor-to-ceiling cubicles with flush doors and concealed hardware for premium washrooms.
  • Compact laminate cubicle: £550–£900 per cubicle. 12 to 13 mm solid grade laminate with stainless or aluminium fittings, fitted.
  • MFC cubicle: £350–£550 per cubicle. Standard height moisture-resistant MFC with aluminium headrail and standard hardware, fitted.

Questions about urinal screens and privacy panels

What is the difference between compact laminate and MFC?

Compact laminate is a solid resin board that is fully waterproof, very hard and impact resistant, suitable for showers, pools and schools. MFC has a chipboard core with a melamine face, so it is cheaper but can swell if water gets into damaged edges. MFC is best kept to dry, lower-traffic washrooms.

Which cubicles are best for schools?

Compact laminate is the usual choice for schools because it resists water, graffiti and impact. Primary schools often use lower cubicle heights, child-sized pans and lower urinal screens. Rising hinges, robust locks with emergency release and anti-ligature fittings in some settings are also common specifications.

What size is a standard toilet cubicle?

A standard toilet cubicle is commonly around 800 to 900 mm wide and 1500 mm deep, with inward-opening doors. Cubicles with outward-opening doors can be shallower. Ambulant cubicles are wider with grab rails both sides. Exact sizes depend on the pan, door swing and space available, and are confirmed at survey.

Get a free washroom cubicles quote

Tell us what you need and we'll come back with a clear price.

Request a quote