Washroom Cubicles

Washroom Cubicles

Cubicle Repairs and Refurbishment

Replacing broken doors, hinges, locks, legs and headrails, or refurbishing worn cubicles without a full replacement.

Free Washroom Cubicles quote

No obligation. We only use your details to reply about this job.

Cubicle Repairs and Refurbishment — Washroom Cubicles

What's involved

Cubicle failures usually start with hardware: hinges that no longer self-close, locks that do not line up, legs that crack or headrails that come loose. The installer identifies the system and sources compatible hinges, indicator bolts, coat hooks, legs and brackets, often fitting stainless steel replacements that outlast the originals. Damaged doors or panels are replaced with new ones cut to match, though colours from older ranges may need to be close-matched. Where cubicles are structurally sound but tired, a refurbishment can swap doors and hardware while retaining panels, which costs much less than a full replacement. Repair visits usually take a few hours; refurbishments one to two days per washroom. You need to provide photos of existing hardware so parts can be ordered ahead of the visit.

How we handle it

  1. Tell us about your washroom

    Use the quote form to share the building type, number of cubicles, urinals and basins, and preferred materials. Plans or photos help us match you with the right installer.

  2. Survey and design

    A specialist surveys the room, plans cubicle widths, door swings and IPS runs, and confirms access requirements. You receive a fixed price and drawing.

  3. Manufacture

    Panels, doors and IPS components are cut to size by the manufacturer. Typical lead times are two to four weeks depending on material and colour.

  4. Install and coordinate

    IPS frames go in for the plumber, then cubicles, urinal screens and vanity units are installed, levelled and fixed with all hardware adjusted.

  5. Snag and hand over

    Doors, locks and hinges are tested, panels cleaned and protective film removed. Any snags are fixed before the washroom is handed back.

Price guide

Washroom cubicle prices depend mainly on the material, the number of cubicles, the height of the system and the hardware specification. Compact laminate costs more than MFC but lasts far longer in busy or wet areas. IPS panels and vanity units are priced by run length. Every quote is fixed after survey and includes delivery and installation.

  • Full-height premium cubicle: from £1,200 per cubicle. Floor-to-ceiling cubicles with flush doors and concealed hardware for premium washrooms.
  • Compact laminate cubicle: £550–£900 per cubicle. 12 to 13 mm solid grade laminate with stainless or aluminium fittings, fitted.
  • MFC cubicle: £350–£550 per cubicle. Standard height moisture-resistant MFC with aluminium headrail and standard hardware, fitted.

Questions about cubicle repairs and refurbishment

What are washroom cubicles made from?

Washroom cubicles are usually made from compact laminate, a solid waterproof board around 12 to 13 mm thick, or moisture-resistant MFC, a melamine-faced chipboard around 18 to 25 mm thick. Premium systems may use glass, timber veneer or steel. Compact laminate suits wet and busy areas; MFC suits offices and lower-traffic washrooms.

How much do toilet cubicles cost?

MFC toilet cubicles typically cost £350 to £550 per cubicle supplied and fitted. Compact laminate cubicles are usually £550 to £900 each. Full-height premium systems start from around £1,200 per cubicle. IPS duct panelling, vanity units and urinal screens are priced separately.

What size is a standard toilet cubicle?

A standard toilet cubicle is commonly around 800 to 900 mm wide and 1500 mm deep, with inward-opening doors. Cubicles with outward-opening doors can be shallower. Ambulant cubicles are wider with grab rails both sides. Exact sizes depend on the pan, door swing and space available, and are confirmed at survey.

Get a free washroom cubicles quote

Tell us what you need and we'll come back with a clear price.

Request a quote